YY-Electron Wireless Home Security Alarm System Manual de servicio descargar pdf (Pagina 7)

The module provides eight factory pre-pro-

grammed semiconductor outputs and a switch-

over relay output and is suitable for the sys-

tems of the JA-80 Oasis, JA-63 PROFI and

JA-65 MAESTRO series. The relay can be con-

figured using 10 DIP switches which allows for

multiple function assignment. There is no limit to

the number of JA-68 modules used in the system

and the JA-68 module can be combined with

GSM, LAN or PSTN (landline) communicators.

and Oasis Sirens

JA-68 Universal Output Module

The JA-80L wireless siren is mains-powered and

is used as a high-performance interior siren

for control panels of the JA-8x line. It can also

work as a sounder for entry and exit delays

when placed near the entrance to a building

and it can also confirm setting and unsetting

of the system. If the siren is disconnected while

there is an alarm, it reports tampering. Another

additional function is the signalling of detector

triggering (e.g. somebody enters the building).

It can also be used as a wireless door bell when

used with RC-89 or RC-88 buttons. The siren is able to react to events from several different detectors and match

the different sounds or melodies to them.

Communication band 868 MHz

Voltage 230 V, 50 Hz, 1 W

Siren piezoelectric, 95 dB/1 m

Sounds (melodies) 8 optional

No. of remote buttons and detectors 8 of Oasis type

and control panels type JA-8x

Communication range approx. 100 m (open area)

Dimensions 90 x 65 x 45 mm

Security grade 2 (EN 60950)

The JA-80L complies with ETSI EN 300220, ETS 300683

and EN 60950

JA-80L Wireless Indoor Siren

The JA-80A wireless external siren is used

for wireless communication with radio control

panels of the JA-8x series. The siren is totally

wireless, powered only by a lithium battery

and there is no need for an external supply.

Installation is therefore easily done and there

is no need to find suitable supplies in the attic

and a difficult power supply solution is avoided.

The siren warns the surrounding area when

a building is intruded. Handling which is not

authorised such as tearing the siren off the wall,

opening the cover etc is signalled to the system.

Communication with the control panel is two-way. The siren regularly checks its functions, battery status and

checks transmissions to keep the radio connection.

Communication band 868 MHz

Voltage Jablotron BAT-80 lithium battery

(included)

Calculated battery lifetime approx. 5 years

(connection frequency every 50 s, flashing switched off)

Siren piezoelectric, 112 dB

Max. acoustic signal of siren 3 minutes

Max. time of flashing 30 minutes after alarm

Communication range approx. 300 m (open area)

Enclosure protection IP 34D

Dimensions 230 x 158 x 75 mm

Operating environment class IV outdoor

JA-80A Wireless External Siren

Communicators

and Sirens

Voltage 12 V DC (from the control panel)

Standby consumption 4 mA

Peak consumption 50 mA

Outputs 8 semiconductor switches

+ 1 switch over relay

Maximum current for single output activation 200 mA

Maximum current for C, NC or NO activation 1A/60 V

Minimum output activation time 10 sec.

Complies with EN 50130-4, EN 55022

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comentarios a estos manuales

Sin comentarios

YY-Electron Wireless Home Security Alarm System Manual de servicio Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad YY-Electron Wireless Home Security Alarm System