YY-Electron Wireless Home Security Alarm System Manual de servicio descargar pdf (Pagina 17)

Wireless

Thermostats

The AC-83 is a two-channel receiver communi-

cating with detectors in the JA-80 Oasis system.

The receiver is powered by 230 V AC. It can

independently operate two heating circuits (relay

X and Y) as a receiver for TP-8x wireless thermo-

stats. The third output is used for a circulating

pump and is closed when the X relay or Y relay

is closed as well. All three relays can be activated automatically every 7 days for 6 minutes when the thermostat is

enrolled to the receiver – the so-called cleaning function. The pump is protected against blocking-up this way mostly

during the summer months. The thermostat can be combined with a PG output of a control panel for operating

the heating system remotely e.g. via SMS messages. The heater can be blocked automatically when a window is

open, if the thermostat for operating with an output is combined with door/window opening detectors or remote

con trollers. Even when the heating system is switched off remotely, the thermostat keeps the temperature above

6 °C through the AC-83. The AC-82 is a version with two outputs without a relay for operating a pump.

Communication band 868 MHz

Voltage 230 V AC, 50 Hz

Wattage approx. 1 W

Load of relays contacts max. 2.5A /250 V in total

Communication range with thermostats TP–8x

approx. 100 m (open area)

Dimensions 76 x 110 x 33 mm (antenna 35 mm)

Oasis

Heating control

Remote heater operating

Thermostat Control panel

AC-83 Boiler switching

Connectors for thermostat connecting

Power supply 230 V

Circulation pump

X Y

AC-83 Diagram of a controlled heating system

The AC-8014 is a fourteen channel receiver.

It cooperates with TP-8x thermostats, wireless

detectors of the system JA-80 and RC-8x cont-

rollers and also enables the connection of TP-87

bus thermostats. It operates with individual cir-

cuits of a multi circuit heating system when used

with wireless thermostats. The receiver can also

operate with the electro-valves of a floor heater,

electro-heating system contactor etc. The receiver

offers fourteen outputs switched by power transis-

tors. The status of all the outputs is signalled by

LED. It also has a relay output for operating a circulating pump. The output is closed when one of the fourteen (1-14)

outputs is closed as well. The receiver also has a cleaning function for a pump which activates the relay every 7 days

for 6 minutes. The activation of the heating system protects against dust settling and blocking-up the pump mainly

during the summer months. A special feature is the MODE channel, which can be operated by programmable outputs

of the control panel or by remote controller. The whole heating system can be remotely switched on/off through the

MODE channel, but the anti-freeze mode is still on and starts heating when the temperature drops below 6 °C.

Communication band 868 MHz

Voltage 230 V, 50 Hz

Stand-by consumption 0.05 A (non-working) max. 0.2 A

Maximum power 1.7 A

Load of output relay max. 10 A/230 V

Output voltage 1-14 and terminal COM 24 V DC

Output load 1-14 max. 0.4 A on output

(power in total for 1-14 cannot be higher then 1,7 A)

Communication range with thermostats TP–8x

approx. 100 m (open area)

Dimensions 258 x 214 x 77 mm

AC-8014 Multi Channel Receiver

AC-83 Universal Receiver

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comentarios a estos manuales

Sin comentarios

YY-Electron Wireless Home Security Alarm System Manual de servicio Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad YY-Electron Wireless Home Security Alarm System