YY-Electron Wireless Home Security Alarm System Manual de servicio descargar pdf (Pagina 25)

Wireless Sirens

and Modules

With Relay

The receiver is able to communicate with

JA-6x control panels, JA-6x wireless detectors

and RC-xx remote controls. When combined with

JA-6x control panels, its output relays copy the

programmable outputs of the control panel. The

UC-216 allows you to assign wireless detectors

to the wired inputs of the non-Jablotron control

panels. The receiver can indicate the alarm sta-

tus of a detector, tamper activations, low battery

states and even communication loss. The recei-

ver can also work with RC-xx remote controls to

control an output relay in various modes: pulse,

latch, on/off or garage door mode.

Communication band 433 MHz

Voltage 12 - 24 V DC

Power consumption approx. 10 mA, max. 45 mA

Communication range

- with detectors up to 100 m

- with remote controls up to 30 m

Max number of detectors/remote controls 8/20

Alarm output (X) max. 1 A/120 V

Tamper output (Y) max. 1 A/120 V

Low battery indication (OUT) transistor output 0.2 A/12 V

Coding digital floating code

Dimensions 100 x 73 x 25 mm (antenna 86 mm)

UC-216 Universal Receiver

The receiver is able to communicate with JA-6x

control panels, JA-6x wireless detectors and

RC-xx remote controls. Contrary to the UC-216,

it is powered by 230 V AC and its output relay

can handle 5 A. When combined with JA-6x

control panels, its output relays copy the pro-

grammable outputs of the control panel. Co-

operation with JA-60 detectors allows you to

automate some processes in the home, such as

switching on the lights after detector triggering,

ventilation control and so on. When used with

RC-xx remote controls it is possible to control

the output relay in modes: pulse, latch and

on/off. Thanks to the highly-rated output contact it can be widely used in home automation for turning the lights

on/off, ventilation, actuators and other devices.

Communication band 433 MHz

Voltage 230 V AC, 50 Hz

Power consumption 1 VA, 1.8 VA relay

Communication range

- with detectors up to 100 m

- with remote controls up to 30 m

Max number of detectors/remote controls 8/30

Output relay dry switch-over contact,

fused to 6 A/250 V

Coding digital floating code

Dimensions 100 x 73 x 25 mm (antenna 86 mm)

Complies with EN 60 950, ETSI EN 300 220,

ETS 300 683

UC-222 Universal Receiver

This device is designed to extend a traditional

wired security system with wireless detectors.

It allows information to be received from JA-60

wireless detectors and RC-xx controls. It is pos-

sible to assign individual wireless devices to

up to 8 zones. Each zone has an independent

alarm status output. Information about tamper

activation, failures and low battery states from

the various wireless devices are combined in 3

relay outputs, the source address being indicat-

ed by LEDs. The UC-280 is also able to transmit

commands for the control of a JA-63A wireless

outdoor siren and UC-216 and UC-222 wireless

output relay modules.

Communication band 433 MHz

Voltage 12 V DC

Communication range

- with JA-60 detectors up to 100 m

- with remote controls up to 30 m

Power consumption approx. 50 mA (all relays off)

max. 100 mA

Zone outputs 8x opto-MOS relays (100 mA/60 V)

Tamper, Fault, Battery 3x opto-MOS relays

(100 mA/60 V)

SIR, X, & Y inputs activated when switched to GND

Security grade 2 (EN 50131-1)

Certificate from NBU category D

Dimensions 195 x 140 x 45 mm (antenna 155 mm)

UC-280 Wireless Interface

and Wireless Relay Modules

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

YY-Electron Wireless Home Security Alarm System Manual de servicio Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad YY-Electron Wireless Home Security Alarm System